ALUMINIUM SCAFFOLDING
The Stairway tower is the ideal for safe and ergonomically working at height. Thanks for the specially designed stairways it is an easily accessible tower and very user friendly when working with tools or other equipment
This scaffold is the most useful ascending aid for activities involving frequent ascend/ descend and transport of loads. Stairway rails add to the all round safety. No tools required, Spacing of platforms every 2 meters (Optional) ease is assembling or dismantling of the tower. Ribbed rung tubing for increased grip.
You can assemble our light weighted aluminium scaffolding towers, without bolts and nuts, swiftly by "snap on" method. The Scaffold towers are secure, sturdy and highly flexible. You can move the wheels fitted towers effortlessly to the location of job at any elevation. More over it provide you better Productivity and saves time.
Some of the Applications
|
Advantages
|
Interior Decoration
JPR Model No: 716
Width : 1000mm Length : 2000mm
Features
- Access tower system featuring easy climb frame rungs spacing of 400mm
- Ribbed tubing for increasing grip
- Two frame widths: Single width 750mm, 1000mm
- Safe working load of 250 kgs
- Toe board system provided
- Special spigots for easy assembly/dismanting
- Castor wheels size 6" up to 8" wheels for above 9m
- Slip resistant platform Length 2000mm for single width
- Self closing trap door with locking facility
- Slip restistant platform Length 2000mm for single width
Self closing trap door with locking facility - Primed brace claw mechanism
- Special M.S Base frame ith screw jack mechanisam from 10mts paltfom & above
Stabilizers
Four stabilizers are further connected to the unit: spring loaded clamp assembly connects them to the "H frames to give a better stability required forthe structure.
Wheels
The wheel and brake unit consists of adjustable nut placed on thrust bearing to take axial thrust. The wheel has been fitted with radial bearing. When the mounting surface is uneven the adjustable nut is used forthe alignment. The lever is provided to release or apply brakes.
Platforms
The Aluminium platform is made up of rectangular sections framed and welded to the checkered plate with ends consisting of claws. The platform could be placed on the frames depending on working height as per requirement
JPR Model No: 717
Width : 1000mm Length : 2000mm
Features
- Stairway rails add to the all round safety. No tools required, Spacing of platforms every 2 meters (Optional) ease is assembling or dismantling of the tower.
- Ribbed rung tubing for increased grip.
- 750mm & 1000mm Single width, 2.0 & 1.8m long slip resistant deck.
- Self closing trapdoor with locking facility
- Maximum load capacity 275 kgs upto 4m. Primed brace claw mechanism & Floating frame spigots. Easy to use toe board system.
- Castors with locking brake mechanism, Castor wheels size 6".
JPR Model No: 718
Features :
- Access tower system featuring easy climb frame rungs spacing of 400mm
- Ribbed tubing for increasing grip
- Two frame width : Double width 1400mm
- Safe working load of 500 kgs
- Toe board system provided
- Special spigots for easy assembly/dismanting
- Castor wheels size 6" up to 8" wheels for above 9m
- Slip resistant platform Length 2000mm for single width
- Self closing trap door with locking facility
- Slip restistant platform Length 2000mm for double with Self closing trap door with locking facility
- Primed brace claw mechanism
- Special M.S Base frame ith screw jack mechanisam from 10mts paltfomr and above
JPR Model No: 719
Features
- Stairway rails add to the all round safety. No tools required, Spacing of platforms every 2 meters (Optional) ease is assembling or dismantling of the tower.
- Ribbed rung tubing for increased grip.
- 1400mm Double width, 2.0 & 1.8m long slip resistant deck.
- Self closing trapdoor with locking facility
- Maximum load capacity 500 kgs upto 12m. Primed brace claw mechanism & Floating frame spigots. Easy to use toe board system.
- Castors with locking brake mechanism, Castor wheels size 6" up to 8m platform and 8" wheels for above 9m Special M .S Base frame with screw jack mechanism from 10mts platform and above.
JPR Model No: 725
Width : 1000mm Length : 1800mm
Width : 1200mm Length : 1800mm
Features
- MS Heavy Duty Movable Mobile Tower Scaffolding.
- Ribbed rung tubing for increased grip.
- 1400mm Double width, 2.0 & 1.8m long slip resistant deck.
- Self closing trapdoor with locking facility
- Maximum load capacity 1000 kgs upto 12m. Primed brace claw mechanism & Floating frame spigots. Easy to use toe board system.
- Castors with locking brake mechanism, Castor wheels size 6" up to 8m platform and 8" wheels for above 9m Special M .S Base frame with screw jack mechanism from 10mts platform and above.
JPR Model No: 727
We are one of the leading manufacturer, Designer, Supplier and Exporter of ALumninium Rectangular Truss in Chennai. We can manufacture this Truss good quality & god strength as per requirement of our client. This truss used for Light, Sound, Exhibition.
JPR Model No: 728
We are leading Manufacturer, supplier and service provider of Aluminium Triangle Truss. its a special purpose Truss used for small span 30ft Maximum with out Support.
Its made up of Three pipe Structure which is welded Together with the help of pipes. We have service provider and supplier of this Aluminium Triangle Truss in Chennai.
JPR Model No: 729
Offered to the clients in several specifications and at the best rate possible, the offered Aluminum Square Truss is considered to be amongst the finest that is available in the market.
In order to guarantee the quality of our products, we have put in place a strict quality checking process. The Customized Aluminum Truss manufactured by us is highly acclaimed for their dimensionally accurate designs.
JPR Model No: 730
We are manufacturer of Circular Truss. This Truss used for Sound, Light, Club, Shows etc.
In addition to straight lengths Prolyte manufactures circular trusses, curved trusses and arcs. These arched trusses are manufactured with a high degree of accuracy ensuring a perfect fit with no distortion. Thanks to the production by means of semi automated welding jigs all produced parts are identical.